THORLABS LEDD3 Series, Руководство по эксплуатации

Страница: 49 / 62

47 Appendix
© 2009 Thorlabs
6.3
Technical Data
6.3.1
Common Data
Line Voltage (Ext. Power Supply) 100 ... 240VAC (-10%, +10%)
Line Frequency (Ext. Power Supply) 50 ... 60Hz
Power Consumption (max) 20VA
Supply mains over Voltage Category II (Cat II)
Input Voltage (LEDD3 chassis) 12VDC
Operating Temperature
1) 0 ... +40 °C
Storage Temperature -40 ... +70 °C
Relative Humidity Max. 80% up to 31 °C
decreasing to 50% at 40 °C
Pollution Degree (indoor use only) 2
Operation Altitude < 3000 m
Warm-up Time for rated Accuracy 10 min
Weight < 1 kg
Dimensions (W x H x D) without
operating elements 160 x 80 x 150 mm³
Dimensions (W x H x D) with
operating elements 160 x 80 x 168 mm³
1)
non condensing
6.3.2
Technical Data
All technical data are valid at 23 ± 5°C and 45 ± 15% rel. humidity)
LED Current Range 0 ... 1000mA
Modulation Frequency Range
(Internal Modulation Mode only) 10 ... 100MHz
Modulation
(Internal Modulation Mode only) Sine Wave
Modulation Depth
1)
(Internal Modulation Mode only)
0 ... 100%
Trigger Output
(Internal Modulation Mode only) Sine Wave
Modulation Frequency Range
(External Control Mode only) 0 ...100kHz
(Sine Wave)
Modulation
(External Control Mode only) Arbitrary
Trigger Input
(External Control Mode only) max. 10V
1V corresponds to 100mA
LEDD3-365
Nominal Wavelength
365nm
Maximum Current 700mA
Cut-off Frequency 90MHz
LEDD3-405
Nominal Wavelength
405nm
Maximum Current 1000mA
Cut-off Frequency 95MHz