THORLABS IP250-BV, Руководство пользователя

Страница: 5 / 16

IP250-BV Blue Laser Diode Controller Chapter 2: Setup and Operation
Rev F, October 24, 2017 Page 3
Figure 1 Laser Diode Connections
2.2. Operation
2.2.1. Automatic Constant Current Control (ACC)
1. This board will only work with laser diodes with grounded cathodes.
2. Set JMP2 to “ACC” for Constant Current operation. JMP2 is located on
the left side of the unit. Always disable the laser driver prior to changing
modes.
3. Refer to output current derating curves in Appendix A before proceeding.
4. Apply power to the unit.