THORLABS HVA200 Скачать руководство пользователя страница 14

High Voltage Amplifier 

18014-D02 Rev E, Sept. 3, 2019 

Page 14 

www.thorlabs.com 

Part 7.  Regulatory 

As required by the WEEE (Waste Electrical and Electronic Equipment Directive) of the 
European Community and the corresponding national laws, Thorlabs offers all end users 
in the EC the possibility to return “end of life” units without incurring disposal charges. 

This offer is valid for Thorlabs electrical and electronic equipment:

Sold after August 13, 2005

Marked  correspondingly  with  the  crossed  out
“wheelie bin” logo (see right)

Sold to a company or institute within the EC

Currently owned by a company or institute within the
EC

Still 

complete, 

not 

disassembled 

and 

not

contaminated

As  the  WEEE  directive  applies  to  self  contained  operational 
electrical  and  electronic  products,  this  end  of  life  take  back 
service does not refer to other Thorlabs products, such as: 

Pure OEM products, that means assemblies to be built into a unit by the user (e.g.
OEM laser driver cards)

Components

Mechanics and optics

Left over parts of units disassembled by the user (PCB’s, housings etc.).

If you wish to return a Thorlabs unit for waste recovery, please contact Thorlabs or your 
nearest dealer for further information. 

7.1. 

Waste Treatment is Your Own Responsibility 

If  you  do  not  return  an  “end of  life”  unit  to  Thorlabs,  you  must  hand  it  to  a  company 
specialized in waste recovery. Do not dispose of the unit in a litter bin or at a public waste 
disposal site. 

7.2. 

Ecological Background 

It is well known that WEEE pollutes the environment by releasing toxic products during 
decomposition. The aim of the European RoHS directive is to reduce the content of toxic 
substances in electronic products in the future. 

The  intent  of  the  WEEE  directive  is  to  enforce  the  recycling  of  WEEE.  A  controlled 
recycling of end of live products will thereby avoid negative impacts on the environment. 

Wheelie Bin Logo 

Содержание HVA200

















Отзывы: