THORLABS EXULUS-HD2, Руководство пользователя

Страница: 34 / 57

EXULUS
®
Spatial Light Modulators Chapter 4: Setup and Software Operation
Rev F, December 7, 2020 Page 31
Figure 41 SLM Default Settings
•
Test Pattern: The SLM contains an internal stair-case test pattern and
can be applied directly to your SLM panel. This pattern is not transferred
through HDMI and is intended for troubleshooting. It returns to the normal
HDMI input mode
when the “
Option
” window is closed.
Figure 42 Internal Grayscale Test Pattern
•
Sensor Setting (only available when the LK220 chiller is connected)
o
Sensor Mode:
▪
Internal: provides the temperature reading from the
output coolant temperature.
▪
External: provides the temperature reading from the
thermistor of High-Power SLM head read out by the
LK220. If the external mode is selected while no sensor
is connected to the liquid chiller, an error message as
well as alarm will be set off. The liquid chiller will be
disabled until the thermistor is connected or the sensor
mode is switched to internal. Note that this will not
readout the temperature from the
Thorlabs’ TSP01 or
a third-party temperature logger.