THORLABS DC4100, Руководство по эксплуатации

Страница: 34 / 40

Page 29
20442_D02
DC4100 6 Appendix
6.4 Safety
Attention
All statements regarding safety of operation and technical data in this instruction manual will
only apply when the unit is operated correctly as it was designed for.
Before applying power to your DC4100, make sure that the protective conductor of the 3 con-
ductor mains power cord is correctly connected to the protective earth contact of the socket out-
let!
Improper grounding can cause electric shock with damages to your health or even death!
The DC4100 must not be operated in explosion endangered environments!
The LED head, control inputs and outputs must only be connected with duly shielded connec-
tion cables.
Do not obstruct the air ventilation slots in housing!
Do not remove covers!
Refer servicing to qualified personal!
This precision device is only dispatchable if duly packed into the complete original packaging
including the plastic form parts. If necessary, ask for a replacement package.
Mobile telephones, cellular phones or other radio transmitters are not to be used within the
range of three meters of this unit since the electromagnetic field intensity may then exceed the
maximum allowed disturbance values according to IEC 61326-1.
This product has been tested and found to comply with the limits according to IEC 61326-1 for
using connection cables shorter than 3 meters (9.8 feet).
Only with written consent from Thorlabs may changes to single components be carried out or
components not supplied by Thorlabs be used.
This precision device is only serviceable if properly packed into the complete original packaging
including the plastic foam sleeves. If necessary, ask for a replacement package.
Attention
The following statement applies to the products covered in this manual, unless otherwise spe-
cified herein. The statement for other products will appear in the accompanying documentation.
Note
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules and meets all requirements of the Canadian Inter-
ference-Causing Equipment Standard ICES-003 for digital apparatus. These limits are de-
signed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
·
Consult the dealer or an experienced radio/T.V. technician for help.