THORLABS 4000 Series, Руководство программиста, Страница: 47 / 97

© 2015 Thorlabs
3 Commands by Subsystem
45
3.8 PD Sense Commands
The
SENSe[1]
subsystem controls the photodiode (PD) sense part of the instrument.
Note
These commands are valid for LDC4000 and ITC4000 Series instruments only. For LDC4000
and ITC4000 Series instruments the command suffix is 1 (can be omitted).
Table <%+%>: PD Sense Commands
Command Description
SENSe[1]
Path to PD sense subsystem
[:CURRent][:DC]
:RANGe[:UPPer] {MIN|MAX|<amps>}
Set photodiode range
:RANGe[:UPPer]? [{MIN|MAX}]
Return photodiode range
:PROTection
[:LEVel] {MIN|MAX|DEF|<amps>}
Set photodiode current limit
value
[:LEVel]? [{MIN|MAX|DEF}]
Return photodiode current limit
value
:TRIPed?
Return protection tripped
:CORRECTION
:POWer[:PDIode][:RESPonse]
{MIN|MAX|DEF|<amps>}
Set photodiode responsivity
value in
A
/
W
:POWer[:PDIode][:RESPonse]?
[{MIN|MAX|DEF}]
Return photodiode responsivity
value in
A
/
W
:POWer[:DC]
:RANGe[:UPPer] {MIN|MAX|<watts>}
Set photodiode range in units of
power
:RANGe[:UPPer]? [{MIN|MAX}]
Return photodiode range setting
in units of power
:PROTection
[:LEVel] {MIN|MAX|DEF|<watts>}
Set power limit value
(photodiode)
[:LEVel]? [{MIN|MAX|DEF}]
Return power limit value
(photodiode)
:TRIPped
Return protection tripped
3.8.1 Photodiode Current Range
Syntax
SENSe[1][:CURRent][:DC]:RANGe[:UPPer] {MIN|MAX|<amps>}
SENSe[1][:CURRent][:DC]:RANGe[:UPPer]? [{MIN|MAX}]
Description
The
SENSe[1][:CURRent][:DC]:RANGe[:UPPer]
command sets the photodiode current range
45
45
46
46
46
47
47
47