THORENS TD 295 MKIV, Инструкция по эксплуатации

Страница: 13 / 20

13
The supplied THORENS mains transformer unit can be con-
nected to nearly any mains voltage supply. The low-tension
plug at the cord of the transformer unit is to be inserted into
the respective socket at the rear panel (right) of the record
player (picture 3).
Connect one end of the supplied RCA leads to the record
player's RCA jacks at the rear panel (left) and the other end
to the dedicated phono jacks at your amplifier. Make sure
that polarity is correct, i.e. right/left channel output to
right/left channel input. The separate thinner lead is used to
make a connection to ground (GRD). Connect this lead bet-
ween the ground post of the record player and the respecti-
ve ground post of your amplifier. If your amplifier does not
feature a separate ground post you may connect the lead
with the outer rim of an unused RCA input at the amplifier
(picture 4).
For amplifiers featuring a 5-pin DIN jack at the phono input
section you will have to acquire a special adaptor (DIN to
RCA) from your THORENS dealer.
The many possibilities of grounding an audio system may
sometimes cause trouble in so far that a certain hum is audi-
ble through the speakers. This humming noise gets louder if
rear view
picture 3 picture 4