How the machine uses the water
The ice maker begins with a fixed charge of water that is contained in the water
trough. As the water flows to the freezing evaporator surface, the portion of
water that does not contain mineral impurities freezes and sticks to the ice
cube molds. The water containing impurities falls back into the water trough.
During the ice making process, fresh water enters into the water trough
continuously as the water in the trough freezes continuously in the evaporator.
How the pump out water drain system operates
The components of the Pump Out Water Drain
System are
:
Water reservoir
PC Board & Water lever switch 1, 2
Water Drain Pump
OPERATION
•
All water coming from the overflow, and from the
melted ice is collected inside the water reservoir.
•
As soon as the water into the water reservoir
reches the maximum level, the water lever switch 1
close, transmitting a low voltage current to PC Board.
Water pump
Compressor
Water inlet
Evaporator
Fan motor
Condenser
Hot gas valve
Water lever switch 2
Water lever switch 1
18
