THOR T35106SKW, Инструкция по эксплуатации

Страница: 15 / 23

non-abrasive cleaning agent, or soap and water, to clean the external casing.
Wipe dry with a soft cloth.
Cleaning Water Inlet Filters
Water inlet filters prevent dirt from entering your machine. These filters
should be cleaned when your machine is unable to receive sufficient water.
To clean the water inlet filters:
●
Unscrew the water inlet hose from the washing machine by turning
the hose anticlockwise and gently pulling
● ​
To remove the water inlet filter from the water inlet valve use pliers
to pull on the plastic bar in the filter
●
Clean the filter thoroughly with a soft brush, wash with soapy water
and rinse thoroughly
●
Re-insert the filter by gently pushing it back into place
A second water inlet filter is located in the tap end of the water inlet hose
which also needs to be cleaned.
Draining Water and Clearing the Pump Filter
If the machine fails to drain water the pump filter is clogged:
●
Before opening the filter cover, place a container under the filter
cover to collect any water left in the machine
●
Pull the top of the cover until the pump filter is fully exposed. Allow
the water to drain
●
Remove any foreign objects from the filter with a soft brush
●
Rotate pump by hand
●
Clean the pump with a soft brush
●
Re-fit the filter by inserting it and turning clockwise
●
Close the filter cover
●
Unplug the appliance before transporting it
15