3
RF11iQ Warranty and User Manual
2. OVERVIEW
The RF11iQ has two isolated circuits. One circuit set contains 7 individually controlled Australian
pin outlets while the other circuit set contains a single control for 4 IEC outlets giving a combined
11 outlet configuration. Each circuit has spike and surge protection as well as filtered technology
to ensure safe and clean power is supplied to any connected devices.
Given the nature of rack applications often being in mission critical installations, the design of the
RF11iQ provides an immediate alert that it has reduced or exhausted its protection capacity but
still continues to allow power through. This allows service technicians to work on a replacement
unit while not affecting the site operations
2.1 FEATURES
Current Limits
240VAC Total unit current is 10A Max
NOTE:
Each Australian pin outlet (1 – 7) has capacity to supply 10A maximum per outlet; REAR
CIRCUIT 8 – IEC x 4 outlets combined can supply 10A output in total.
Individually controlled switchable circuits
Seven individually controlled Australian pin outlets and a single control for 4 IEC outlets via the
Smartphone App or through the web browser. This allows the user to select outlets to be switched
of when not in use or required remotely as well as controlling individual circuits if a fault condition
is apparent while allowing other sections to still remain operational (Providing the RF11iQ unit is
fully functioning and has not sustained any damage)
NOTE:
If a circuit is switched “OFF” via the Smartphone App or the web browser or by Factory
Reset Default condition, if the RF11iQ is powered “OFF” and then “ON” with the power switch or a
natural power outage … ONLY THE OUTLETS THAT WERE SET TO ACTIVE “ON”: before the events
outlined, will; automatically be switched “ON” . To activate the outlets that are “OFF” you must
use the Smartphone App or the web browser to switch the outlets “ON”. The unit MUST be LAN
connected and all the parameters in your browser and server network set correctly… See the
section on setting up the web browser and Smartphone App outlined later in this booklet.
Soft Start
The RF11iQ has an in built ‘Soft Start” feature to allow the unit to be switched on without causing
a major overload of the 10A Circuit Breaker in the unit as may connected devices have a 4 to 7
times greater inrush current then the final current drawn.
