THOR GL167-N, Инструкция по установке и эксплуатации

Страница: 20 / 32

6. Refit the control knobs to the front control panel. The control knobs are a push fit onto the shafts of the gas
control valves.
●
Adjust the Gas Regulator
Gas Type Identification Label
On completion of the gas conversion, replace the gas type identification label, located on the right hand panel.
Low Fire Adjustment
The gas control valve is fitted with a maximum flow bypass blanking screw. No adjustment is required.
Commissioning
Before leaving the converted installation;
Remove the blots
Injector of Pilot Burner
Injector of Pilot Burenr.
Digital mark is 25, the diameter of the
Injector is
￠
0.25mm. use to LPG.
Digital mark is 45, the diameter of the
Injector is
￠
0.45mm. use to Natural Gas.
19