Pull down the locking block on the wall plate using the locking
cord and after it clicks into position gently release.
If you need to dismount the TV pull
down the locking cord
and gently release.
You can then lift
the TV off the
wall plate.
W-A
USER GUIDE -
28060T
42-70"
Multiwall TV Wall Mount
• TV Size range:
42-70"
• Maximum weight capacity:
50kg
• Mount function:
Tilts
0°/-5°
• Wall to TV distance:
31mm
• Compatible with VESA sizes:
200 x 200, 300 x 200, 300 x 300, 400 x 200,
400 x 300, 400 x 400, 600 x 400
Components
WARNING
A
2
1
Wall Mount & VESA Compatibility
• Please read these instructions carefully
before installation.
If in any doubt about
safely installing this product, contact a
professional installer for assistance.
• To ensure safe installation make sure that the
surface you are mounting your bracket on is
in a good state of repair and that the wall will
support the combined load of the equipment
and hardware. Also check for hidden wiring or
plumbing.
• Check the components list and images to
check there are no missing or defective parts.
• Never exceed the Maximum Weight Capacity.
• To prevent overheating it is advisable not to
mount your TV directly over a fireplace or
radiator.
• This product was designed to be installed
on plasterboard, wood stud walls and solid
concrete/brick walls. When fixing to walls
screws/bolts should be fixed into bricks/
stone not into mortar courses.
• For larger/heavier TVs we recommend that
you ask someone to assist you with lifting
and positioning your TV.
• This product is suitable for indoor use only.
• Improper installation or use of this product
can result in product failure, damage or
personal injury.
• This product contains small items that could
cause choking if swallowed, so keep these
items away from children and pets.
• Appropriate safety equipment and proper
tools must be used for installation. Always
check manufacturer’s operating and safety
instructions before using tools, ladders and
other equipment.
M-C
M-D
M8x50(x4)
M6x30(x4)
x1
M-B
M6x14(x4)
x1
x1
x1
M5x14(x4)
M-A
M8x30(x4)
D5x(x4)
D8x(x4)
x8
x8
M-E
M-F
M-G
M-H
M-I
© Philex Electronic Ltd. 2019. V1
Technical Support:
www.philex.com/support
• VESA is the standard adopted by most TV
manufacturers for wall bracket mounting.
• There are 4 holes on the back of every flat
screen TV and the space between the holes
is governed by the VESA standard.
• VESA comes in a range of sizes depending on
the weight and size of the flat screen TV;
sizes 50 x 50mm, 75 x 75mm, 100 x 100mm,
200 x 100mm and so on... are standard.
Not all flat screen TVs are compliant, contact
theTV manufacturer for assistance if your
TV does not appear to comply with VESA.
• To check if your TV or monitor is compliant,
look at the rear of the display there should
be 4 screw-holes in a square pattern or in
larger displays a rectangular shape.
• Measure the distances marked (2) (horizontal)
x (1) (vertical) below in mm to find your
VESA format.
7. Mounting the TV on the Wall Plate
With two people, lift the TV
with the TV plate and standoffs
attached and hook the
TV plate
B
over the lip
on the wall plate
A
, as shown
in
Fig. 10/11/12.
Centre the TV on
the wall plate and
lock in place.
x4
x4
x4
x20
Before installation check that you have all the components shown here and
that none of them are damaged.
B
C
D
W-D
W-C
W-B
Components
Fig.10
Fig.11
Fig.12
Fig.13
Pull down and
release the
locking chord
to lock and
unlock
8. Locking and Unlocking the TV plate
