the door to the opposite side.(Fig 6).
◎
Shelf Change
5.Pull open middle section of the door gasket, then it will come out the handle screw
hole.(Fig 7); remove the handle and install it on the opposite side.(Fig 8)
Do as the following shows if needing to pull out or change the shelves;
6.Install the upper door hinge to the opposite side and tighten the screws. (Fig 9)
7.Set glass door shaft to aim the shaft of lower door hinge (Fig 10);and then aim the
upper door hinge (Fig 11); adjust the door and the cabinet is aligned and leveled,
then tighten all the lock screws.
You also can call customer service for reversal instructions if it is necessary.
Firstly take out all the wines from the shelves and pull shelf out to the limit. Then
press down the left limit of sliding rail and meanwhile press up the right one, pull the
shelves out at this time. It could be easily pulled out if doing the three steps (Press
down left limit, press up the right one and puling out) at the same time.
◎
Placement and storage of wines
Several common layouts of wines:
12
9