Thor Fiber H-AC3-CMOD-QAM-LL, Руководство пользователя

Страница: 7 / 22

H-AC3-CMOD-QAM-LL
7
Weight Approx 1kg
Operation temperature 0~45
℃
CHAPTER 2
Safety Instruction and Installation
Safety Instructions
WARNING:To prevent fire or electrical shock, do not expose the device to rain or
moisture.
The encoder modulator is powered with a voltage of 12VDC. Please do not use
with any other power source or it can cause serious harm to the unit and will void
the warranty provided by Thor Fiber.
Therefore: Follow these simple rules

Do not replace power supply with a voltage greater than 12VDC.

Do not connect the device to the power unit if the power cord is damaged.

Do not plug the device into anything until it has been correctly installed

Do not cut the cord.
Avoid placing thedevice next to central heating components and in areas of high
humidity.
Do not cover the devicewith elements that obstruct the ventilation slots.
If the encoder modulator has been kept in cold conditions for a long time, keep it in a warm
room for a minimum of 2 hours before plugging it into a socket.
Mount the device in a vertical position with the connectors located on the top side.
If replacement parts are required, be sure the service technician has used replacement parts
specified by Thor. Unauthorized substitutes may result in fire, electric shock or other hazards.
Safety check- Upon completion of any service or repairs to this device, ask the service
technician to perform safety checks to determine that the device is in proper condition.