H‐HDMI‐CC‐RF
Chapter 3 Web‐page Management
You can alter the same settings through a computer by connecting the device to the web NMS
Port. Always make sure that the computer’s IP address is different from the Units IP address;
otherwise, it will cause an IP conflict. Below is an explanation of how you can adjust settings
through a web portal.
3.1
Login
The default IP address is 192.168.0.136 and you can connect the device and web NMS through
this IP address.
Connect the PC (Personal Computer) and the device with an Ethernet cable, and use ping
command to confirm that they are on the same network segment. For instance, the PC IP
address is 192.168.99.252, we then change the device IP to 192.168.99.xxx (xxx can be 0 to
255 except 252 to avoid IP conflict).
Use a web browser to connect the device with a switch or PC by inputting the device’s IP
address in the browser’s address bar and press Enter.
It will display the Login interface. Input the Username and Password
(Both the default
Username and Password are “admin”.)
and then click “Login” to start the device setting.
