5.1 Unpacking and Handling:
A full H-16CVBS-RF-MOD agile modulator is shipped with all equipment assembled, wired, factory teste
packaged in an appropriate shipping container.
5.2 Mechanical Inspection
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is clean, and no wire, cable, or
connectors are broken, damaged or loose.
5.3 Precautions
Avoid heat buildup
Ensure easy access to rack wiring
Facilitate servicing and maintenance
Avoid direct heating or air conditioning
Make sure rack supports are sufficiently rigid to support racks
Beware of dripping water onto equipment form leaky roofs, waveguide roof entries and
5.4 Damage in Shipment
Should any damage be discovered after unpacking the unit, immediately file a claim with the carrier. A full report of the
damage shall be made, and a copy forwarded to the Seller
6. INSTALLATION
Please follow the instructions below to install the
1. Connect the power plug to the power jack
2. Connect the video source to the H-16CVBS
3. Connect the H-16RCA-RF-MOD to the TV
4. Power up the modulator and wait for
RCA
RCA
RF
RCA
RF
agile modulator is shipped with all equipment assembled, wired, factory teste
packaged in an appropriate shipping container.
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is clean, and no wire, cable, or
Make sure rack supports are sufficiently rigid to support racks
Beware of dripping water onto equipment form leaky roofs, waveguide roof entries and cold-water
Should any damage be discovered after unpacking the unit, immediately file a claim with the carrier. A full report of the
and a copy forwarded to the Seller
Please follow the instructions below to install the H-16RCA-RF-MOD
1. Connect the power plug to the power jack
16CVBS-RF-MOD like DVB or STB
to the TV
. Power up the modulator and wait for 2 minutes to set it u
p
RF
RF
RF
RF
agile modulator is shipped with all equipment assembled, wired, factory tested, and then
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is clean, and no wire, cable, or
pipe condensations
Should any damage be discovered after unpacking the unit, immediately file a claim with the carrier. A full report of the
