Audio Dubbing
☺
The sound dubbing enables you to replace the recorded sound on the mono track of a VHS tape
whilst keeping the recorded sound on the HiFi tracks. A unit connected to the AV1, AV2, AV3, or
AV4 sockets, or even a microphone connected to the MICRO socket on the front of the video
recorder can provide means of dubbing your recordings.
1
Rewind the cassette to the start of the sequence to be dubbed and pause the picture using
the PAUSE (
28
) key.
2
Press the key AV on the remote control (
22
) or AUDIO DUBBING on the front of the
video recorder to activate the dubbing function.
3
Select the connected unit (Au3 for white, red and yellow cinch sockets on the front of
the video recorder; Au1, Au2 or Au4 for the sockets at the back of the unit; MIC for a
microphone connected to the front of the video recorder) to monitor the sound.
4
Press PLAY (
24
) to start dubbing, PAUSE (
28
) to interrupt the dubbing and STOP
(
27
) to stop. It is possible to connect a headphone to the HEADPHONE socket on the
front of the video recorder to monitor the sound.
Insert editing
☺
Thanks to Insert editing, you can replace part of an existing recording precisely without disturbance
at the edit points.
It is possible to insert from another video recorder, from a camcorder, or from another unit (TV set,
another video recorder).
1
Load the cassette and press key status (
4
).
2
Select unit or source of the sequence which is to be placed on the tape.
3
Fast forward the tape to the end of the sequence to be replaced and press STOP (
27
).
4
Press key 0000 (
16
) to reset the counter.
5
Rewind the tape to the beginning of the sequence to be replaced and press key PAUSE (
28
).
6
Press on REC (
26
) then on INSERT and finally start playing from the source so as to
begin the insertion.
7
The insertion will automatically stop when the counter reaches 0000.
Auto Sequence Memory
☺
Thanks to Auto Sequence Memory, you can choose different sequences from a tape and
consecutively view them. If you are connected to another video recorder fitted with a compatible
PAUSE socket, it is possible to copy these sequences and to automatically carry out the editing.
1
Connect the CAM/PAUSE sockets of the two video recorders with the assembly cable.
2
Using a SCART/Peritelevision cable, connect the AV1 socket of this video recorder
(master) and the AV2 socket of a second video recorder (slave), which is, in turn
connected to the television by the AV1 socket.
3
Load the tape to be copied.
4
Load the blank tape in the other video recorder and select the AV2 socket.
5
Display the S
UMMARY
menu, select Tape controls option, then the Auto seq. Memory
line.
6
Find the beginning of the first sequence, validate with ok (
11
), then press key
B
(
8
).
7
Find the end of the first sequence and validate with ok (
11
).
8
Repeat this process for the other sequences. Select the Start assembling line to begin
the editing and validate with ok (
11
).
24
Use
Audio Dubbing –
Auto Sequence Memory
This video recorder is not as precise as professional editing equipment.
☺
r93_UK01 23/05/00 16:33 Page 24
Содержание VTH7090U
Страница 1: ...VCR ...
Страница 4: ...1 1 1 1 2 3 ...
