5
1. Connect the VHDC300 to the HDTV source using the supplied
VGA cable.
2. Connect the Y, Pb and Pr outputs of the VHDC300 to the
corresponding inputs of the HDTV monitor with the supplied
component video cables. Make sure the color codes on the
cable match with connectors as follows.
Cable Connector Color
Set-top Box/Monitor Connector
Green
Y
Blue
Pb
Red
Pr
3. Plug in the connector from the supplied 12 volt AC power
supply and plug the supply into a 120V 60 Hz AC outlet.
4. Turn on the HDTV set-top box and monitor, and check the
picture. If no picture appears, or the picture is unstable, turn
off the monitor and recheck the connections.
Installation
Pr
Pb
Y
BACK OF TV
HD MONITOR OUT
BACK OF DTC100
(Set-top Box)
OUTPUT TO TV
Pr
ON/OFF
POWER
VGA INPUT
(From DTC100)
H. ADJ
12VAC
300mA
Pb
Y
VGA/HDTV
Component Video (Y Pr Pb) Adapter
VHDC300 Manual 10/9/00 2:46 PM Page 5
