Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
51
3. Local Log and Remote Log
The gateway builds a log of firewall blocking actions that the firewall has taken. Using the Local Log
page lets you specify an email address to which you want the gateway to email this log. You must also
tell the gateway your outgoing (i.e. SMTP) email server’s name, so it can direct the email to it. Enable
Email Alerts has the gateway forward email notices when Firewall protection events occur. Click
E-mail Log to immediately send the email log. Click Clear Log to clear the table of entries for a fresh
start.
The log of these events is also visible on the screen. For each blocking event type that has taken place
since the table was last cleared, the table shows Description, Count, Last Occurrence, Target, and
Source.
Fig. 32 Gateway\Firewall\Local Log
The Remote Log page allows you to specify the IP address
where a SysLog server is located on the
LAN Side and select different types of firewall events that may occur. Then, each time such an event
occurs, notification is automatically sent to this log server.
Fig. 33 Gateway\Firewall\Remote Log
