Chapter 2: Web Configuration
Illustrations contained in this document are for representation only.
51
Bridging
The Bridging page provides a location where settings can be adjusted related to the wireless WDS
(Wireless Distribution System) feature.
WDS is a system that enables the interconnection of access points wirelessly. It may also be
referred to as repeater mode because it appears to bridge and accept wireless clients at the same
time (unlike traditional bridging).
The wireless gateway can be placed in a mode that allows the gateway to communicate with
other “extender” wireless access points either exclusively or mixed with communications to local
PCs. Use this page to designate the Remote Bridges the gateway is allowed to communicate with,
and to select the Wireless Bridging mode.
Fig. 38
Wireless Bridging:
Choose Disabled to shutdown this function; select Enabled to turn on the function of WDS.
Remote Bridges:
Enter the MAC Addresses of the remote Bridges to relay the signals for each other.
Apply:
After proper configuration, click Apply to invoke the settings.
