GB
31
Washing Clothes
1.Open the door to load the articles into the drum.
DO NOT OVERLOAD the appliance or your laundry may not be washed properly.
Please refer to the chart below to determine the load capacity for the type of
laundry you are washing.
Fabric Type
Load Capacity
Cotton
7 kg
Synthetic
3.5 kg
Wool
2kg
Delicate
2.5 kg
2.Close the door.
3.Put the detergent and, if required, softener or pre-wash detergent, in the appropriate compartments.
4.Turn the water supply on and press .
5.Turn the programme selection knob to select the desired programme.
6.Repeatedly press to select the desired temperature.
7.Repeatedly press to select the desired spin speed.
Temp.°C
/
Essorage
/
8.Press and the appliance will begin the cycle.
-If the delay timer is set, the delay time will appear on the display. After the delay time has elapsed,
the appliance will begin the cycle. See the Delay function section below.
-To pause, press again.
9.When the cycle is finished, the display will briefly show “End”.
-If the signal function is activated, the appliance will sound.
10.Open the door and remove the laundry.
Delay function
You can use this function to delay the start time of a programme.
After you select a programme, repeatedly press to set the desired time and then press .
Départ
différé
/
The time and the symbol will appear on the display.
-The maximum delayed start time is 24 hours.
-Each time you press this button, the start time will be delayed by one hour.
-To cancel the delayed start, first press and then repeatedly press until the display
shows “0h”.
Départ
différé
/
Signal function
You can use this function to turn on or off the sound made when pressing the buttons or turning the
programme selection knob.
Press and hold and for about 3 seconds until beeps will be heard to
indicate the signal function is activated.To deactivate this function, press and hold
Temp.°C
/
Essorage
/
Temp.°C
/
Essorage
/
and again for about 3 seconds until the beeps are heard.
Downloaded from www.vandenborre.be
