THOMSON TR-069, Руководство по настройке

Страница: 79 / 110

E-DOC-CTC-20071119-0003 v1.0
73
6| Service Provisioning
6.2 WLAN
Introduction
Given the increasing deployment of wireless gateways and the known complexity of setting up a secure
wireless LAN network, remote management of wireless settings can lower the complexity for the end-user.
For example, remote management can configure or reset the SSID to a “default value” and configure the
security settings. The end-user does not need to manually configure the Thomson Gateway. Given a
broadcasted SSID and preconfigured security settings, the end-user must only configure the WEP or WPA key
on its PC. Remote management can also reset wireless settings to defaults that are provided to the end-user,
turn off security to allow the user to associate and configure again.
WLANConfiguration data model
The IGD data model on the Thomson Gateway contains the object
“InternetGatewayDevice.LANDevice.1.WLANConfiguration.1.”.
This object contains the objects and parameters needed for the configuration of the wireless service:
Enable or disable the wireless service.
Configure the wireless settings.
Troubleshoot the wireless service.
Vendor specific parameters
The WLANConfiguration data model on the Thomson Gateway contains following vendor specific parameter:
X_000E50_ChannelMode : this parameter can be used to request automatic selection of the channel. The
parameter has one of the following values:
Auto (default value)
Manual
Message flow
Following illustration shows a possible message flow for wireless service provisioning:
ACS CPE
Transaction session
2) Apply changes
Configure the Wireless Service
1) SetParameterValues
3) SetParameterValuesResponse
...
...