
P4
ConneCTIon
1.4accessories
y
y
1 User Manual
y
y
1 Remote control unit
y
y
2x Batteries (AAA type)
y
y
1 Infrared Eye
y
y
USB to mini-USB converter cable.
noTe:
The batteries should not be recharged, disassembled, electrically short-circuited or be
mixed or used with other types of batteries.
If rechargeable accumulators instead of batteries are going to be used, we recommend using
(e.g. NiMH) types with low self-discharge to ensure long time operation of remote control.
1.5usageofexternalusbdevices
y
y
It is recommended to use USB 2.0 storage devices. If your device is not compatible to USB
2.0 specifications, recording, playback and other multimedia functions of the receiver would not
work properly.
y
y
To ensure best performance of your USB storage device please format it by this receiver (menu
Media+ Disk Format
) to FAT system. Not all file systems are supported by the receiver.
y
y
When using an external USB HDD (Hard Disk Drive) with the receiver, please note that some
HDD’s might draw more power than the receiver can deliver (5 V / 500 mA). If so, please
connect your USB HDD to an appropriate external power adapter. THOMSON cannot
guarantee compatibility with all types of USB storage devices.
y
y
It is advised not to store important information on USB storage devices used with the receiver.
Always make backups of data on USB storage devices before using them with the receiver.
THOMSON will not take responsibility for any loss of information or circumstances caused by
loss of information.
2.0ConneCTIon
ConnectingtoTv,Terrestrialantenna,IreyeandmainPower
Fig. 1
To receive the broadcast signal, the terrestrial antenna cable should be connected to the ANT
IN connector of the receiver. Then connect the IR connector into the receiver and make sure
it is fully inserted into the IR sensor input. Afterwards you can plug in the power adapter to
the main power source (100 ~ 240 V AC, 50/60 Hz Auto detecting). After all connections are
established carefully, the IR eye LED must light up. If not, the Remote Control will not react.
ConnectiontoavCr
Fig 2
ConnectingtoDvDrecorder
Fig 3
ConnectingtoaProjector/audioamplifier
Fig 4
2.1DefaultPIn-code:0000