P14
MAin Menu
7.1.4 rename favourite list
This menu allows you to personalize the names of the 8 available favourite lists.
Use
pq
to select
Rename Favourite List
from the
Edit Channel
Menu and press
ok
to proceed. The
names of all groups are now displayed. Select a favourite group with
pq
and press
ok
to edit
its name. A text field will now pop up at the right of the screen. Use
tu
pq
to select characters
and enter them with
ok
. When you have finished editing, press
bLue
to save the changes. When
all changes have been made, press
eXiT
twice to leave this menu.
7.2 installation
7.2.1 Auto scan
Use
pq
to select
Installation
and press
ok
or
u
to advance.
Select
Auto Scan
with
pq
and press
ok
to enter.
Use
tu
to toggle between
Yes
or
No
. When
FTA Only
is set to
Yes
, scrambled channels won’t be
stored in the channel list. Use
pq
to highlight
Search
. Now press
ok
to start auto scan.
The receiver will store all found channels in the channel list.
7.2.2 channel scan
Use
pq
to select
Installation
, press
ok
or
u
to advance.
Use
pq
to select
Channel Scan
and press
ok
to enter.
Use
tu
to toggle between available scan modes:
By Channel
and
By Frequency
.
If
By Channel
is selected, use the cursor buttons to select
Scan Band
and
Channel No
. If
By Frequency
is selected, use the cursor buttons to select
Frequency
and
Bandwidth
. Highlight
Search
and press
ok
to start scanning. Newly found channels will be added to the channel list.
7.2.3 Antenna Power
Use
pq
to select
Installation
, press
ok
or
u
to advance.
Use
pq
to select
Antenna Power
and press
ok
to enter.
Set to
On
if you use an active antenna.
Select
Off
for passive antennas.
When set to
On
, 5 V will be present on the ANT IN connector of the receiver.
Press
eXiT
to leave the
Antenna Power
menu.
7.2.4 Lcn (Logical channel numbering)
If
LCN
(Logical Channel Numbering) is activated and an LCN signal is provided by the operator,
channels will be stored in an operator defined order. Set
LCN
to
On
to activate operator defined
channel numbering or
Off
to store channels in found order. This function only applies when a new
channel search is performed.
