DESCRIPTION:
TECHNICAL SPECIFICATIONS
Model No.
THSFC10VR/ THSFC10VB/ THSFC10VN
Item
Vintage ceramic fan heater
Power 1 (
)
750 W
Voltage:
220-240V~ 50Hz
Power 2 ( )
1500 W
CLASS II
This product conforms to the requirements set by directives 2014/35/EC (repealing directive
73/23/EEC amended by directive 93/68/EEC) and 2014/30/EC (repealing directive 89/336/EEC)
USING THE HEATER:
DO NOT USE THIS HEATER IN A BATHROOM.
1.
Before using this appliance, ensure that it is placed on a flat, stable surface.
This appliance is equipped with an anti-tripping switch that switches the appliance off in
the event that it tips over and is not placed on a stable surface.
Do not cover or put any goods on the heater when it is working.
Place the heater at 90cm from the wall, the furniture and curtain.
2.
Check that the voltage corresponds to that of the power supply (230v mains socket)
Once the appliance is plugged in, turn the thermostat dial and heater will switch on.
3.
Turn the thermostat dial in a clockwise direction towards "MAX", then turn the "
" dial
towards "
" to activate the ventilator motor. Check that everything is working correctly.
4.
Turn the function setting switch from " 1 " to " 2 "
to select your chosen power.
(500W / 1000W)
5.
After reached the desired temperature, to maintain the room temperature: turn the
thermostat knob counterclockwise until
you hear the small “click” sound.
The desired
temperature will be kept constant by the thermostat function.
6. To turn off the product, turn the switch to the ventilation position and let it run for 2 minutes
to release the heat accumulated inside the product before turning the switch to 0.
7.
The heater includes a protection device protecting against overheating. If the heater
overheats, a temperature limiting system inside the appliance will automatically cut the
power supply. Turn off the unit, unplug the unit from the AC outlet, and allow it to cool for
at least 10 minutes. Plug the unit back into the AC outlet and put the heater back into
operation.
EN-6
