COMPOSITION:
1) Indicator light
3) Air outlet
2) Control panel
4) Anti-tipping switch
USING THE HEATER:
1.
Before using this appliance, ensure that it is placed on a flat, stable surface.
This appliance is equipped with an anti-tripping switch that switches the appliance off
in the event that it tips over and is not placed on a stable surface.
2.
Check that the voltage corresponds to that of the power supply (230v mains socket)
Once the appliance is plugged in, turn the thermostat dial and the light will switch on.
3.
Turn the thermostat dial in a clockwise direction towards "MAX" , then turn the "0" dial
towards " " to activate the ventilator motor. Check that everything fonctions correctly.
4.
Turn the function setting switch from "I" to "II" to select your chosen temperature.
To set the power, turn the dial from 0 towards I or II:
0
= Off
= ventilation
I
= hot
II
= very hot
5.
After reached the desired temperature, to maintain the temperature: turn the
thermostat knob
counterclockwise
until the light turns off. The desired temperature will
be kept constant by the thermostat function.
6.
The heater comprises a protection device protecting against overheating. If the fan
heater overheats, a temperature limiting system inside the appliance will automatically
cut the power supply from the heating element while the ventilator continues to
function to cool the appliance. The appliance can re-start as soon as the normal
conditions and temperature needed for it to function are re-established. Identify the
causes of this overheating to avoid any recurrences.
7. When not using this heater, return the 2 dials to their initial position: "0" and "MIN. ",
and then unplug it.
GB-7