P28
sPECIfICATIons
The remote
control does not
work
The batteries of the remote
control are not inserted, wrongly
inserted or exhausted.
Fluorescent lamps are disturbing
the remote IR signal.The distance
or angle between the remote
control and the receiver is too far
or too wide.
Check whether the batteries are inserted
correctly or exhausted, if so replace the
batteries in the remote control.
Switch OFF the suspected lamp.
Try a smaller distance or angle between the
remote control and the receiver.
The USB storage
device is not
working properly.
Formatted incorrectly.
An HDD with too much folders or
partitions is connected.
USB 1.1 device connected.
Format the USB device by receiver in menu
Channel Manager HDD Manager
.
HDDs from above 500 Gb or HDDs with
more partitions might need longer time to
be detected. The receiver might not work
properly with such an USB device or can’t
guarantee functionality with all available USB
devices.
The receiver
switches
to Standby
automatically.
The Auto Standby function
is activated and reached the
adjusted time (default 3h).
In the menu
Timer -- Time Adjust
you can
adjust the Auto Standby time or disable it.§
PVR record
Playback of recordings made on
(another) receiver is not possible.
Based on license reasons and rights, playback
is possible only on the receiver on which the
recording was amde.
PVR playback
MR PIN code is not accepted.
The operator can change the playback PIN
code on smart cards. (Maturity Rate PIN).
Please, contact your operator.
9.0 sPECIfICATIons
video
Profile level:
MPEG-2, MPEG-4 H.264/AVC
Aspect ratio:
4:3 and 16:9, Pan & Scan, Letterbox, combined
Video resolution:
576p, 720p, 1080i, 1080p
Audio
Audio mode:
Mono L/R, Stereo, Dolby® Digital Plus*
Transcoding for HDMI and S/PDIF:
Dolby® Digital Plus to Dolby® Digital*
*Dolby Digital Plus and the double-D symbol are registered trademarks of Dolby Laboratories
Tuner
LNB power:
13/18 V DC (+/- 1 V), max. 350mA, overload protected
DiSEqC version:
1.0, 1.2 and Goto-X
Multimedia
Audio playback:
MP3*
Picture view:
JPG, JPEG, BMP*
