HUVUDMENY
P15
Tv format
Set the standard corresponding to your TV set. Available options are:
PAL
and
NTSC
.
video output
This setting is only relevant when the receiver is connected to the TV set via Scart. Select
RGB
for the
best picture quality or
CVBS
if your TV doesn’t support
RGB
.
7.3 Channel search
To access the menu press
MEnu
and select
Channel
Search
. It contains two options:
Dish setup
and
DB
(
Data
Base
)
Management
. Select an option and press
oK
to enter it. Press
to exit the menu.
7.3.1 Installation
7.3.1.1 satellitinställning
Tryck på
p
/
q
för att markera satelliten din parabol visar mot. Dess antenninställningar visas på
höger sida. Du kan nå den högra sidan med
tu
och återgå till satellitlistan med
.
7.3.1.2 Konfigurera antenninställningarna för den valda satelliten
LNB Type:
Press
tu
or
oK
to show the list of LNB Types. The Universal LNB
(09750/10600 MHz) is supported – the most used on the market.
SatCR
A and SatCR B are used for SatCR systems. If only 1 SatCR LNB is connected,
use SatCR A. SatCR systems are mainly installed by professional experts. An
optional satellite splitter is required for multi-users.
LNB Power:
Use
tu
to set the LNB power. 13/18V is the setting for a Universal LNB.
22KHz:
Use
tu
to switch the 22KHz oscillator signal on or off.
Auto
is the setting for
a Universal LNB.
DiSEqC1.0:
To select the correct port from up to 4 (if available) for the corresponding
LNB.
DiSEqC1.1:
To select the correct port from up to 16 (if available) for the corresponding
LNB.
Motor:
If using a motor driven dish, press
tu
to choose between
DiSEqC1.2
and
DiSEqC 1.3
depending on the motor type you use.
DisEqC 1.2
DiSEqC 1.2 is a protocol for motor-driven dishes, the dish/motor-combination itself needs to be
aligned due South (North for Southern hemisphere) at its reference position at 0°. It is possible to
manually search and store every satellite individually.
Refer to the manual of your motor-drive for more detailed information. Modern motor drives have
usually also the capability of the enhanced DiSEqC 1.3 protocol, which would be preferred, since it
can find satellite positions automatically, relative to a geographical location.
Move the motor to the right position for locking the signal like explained below. Press
oK
to enter
the submenu.
Move Continue:
Press
tu
for moving
West
/
East
. Press the opposite
tu
to stop moving.
Move Step(1)
:
Press
tu
for moving
West
/
East
in 0.3° step.
