GB-8
Only operate the radiator in normal upright position with feets assemblies attached to
the bottom
Note: The heating elements of the device are covered with a thin protective layer of
lubricant, there may be a small amount of smoke and odor during the first use of the
heater. This is not harmful or dangerous and rapidly stop.
Please ensure that there is sufficient ventilation of the room.
OPERATING:
PRECAUTIONS FOR USE
1.
Before using this appliance, ensure that it is placed on a flat, stable surface.
This heater is equipped with a tip over device that stops the product rollover and if it
is not placed on a stable surface.
2.
Place the heater at least 90cm from the wall, furniture or curtains.
3.
Check that the voltage corresponds to that of the power supply (230v mains socket)
4.
Leave the heater to cool and unplug it before moving it, and use the handle to
move it.
USING THE HEATER
1. The switches control the thermostat and power selection should be on the OFF and
minimum position, connect the radiator to the socket.
2. Switch on the heater on one of the following positions:
- Turn the power switch to 1 : low power
- Turn the power switch to 2 : high power
3. The ambient temperature can be set by the thermostat. Turn the thermostat knob in
the direction of clockwise to increase the temperature, or counterclockwise to
decrease, until the desired temperature.
4. When not using this heater, return the 2 switches to their initial position: "0" and
thermostat to "MIN. ", and then unplug it.
5. The heating system has a protection device against overheating.
6. Do not cover or place any object on the radiator during operation.
