COOL
:
Press once this button to start the evaporative cooling function. Press again this
button to cancel.
TIMER
:
It can be set between 0.5 to 8 hours, increased by 0.5 hour intervals. When the
digital display shows 8 hours, press again this button to cancel.
DISPLAY LIGHT ON/OFF
: Press once this button to light-off the display, press one more
time to light-up again.
CHILD LOCK
: Press this button 3 seconds to lock the control panel in case children mis-
control. Press 3 seconds again to cancel this function.
3. CLEANING AND MAINTENANCE
Always disconnect the appliance from the mains by switching it off and removing the plug
from the power outlet before cleaning.
Unplug from outlet.
No water on the control panel.
Cleaning the filtration mesh
1.
Remove plug from wall outlet.
2.
Catch the filtration mesh handle and pull upwards.
3.
Clean filtration mesh with mild detergent and soft brush.
4.
Make sure filtration mesh is completely dry before installing.
Note: After long time operation, the filtration mesh becomes clogged with dust and dirt,
which will greatly affect the unit’s performance. It is recommended to clean the filtration
mesh frequently.
Cleaning the water tank
1.
Remove plug from wall outlet.
2.
Pull out the water tank.
3.
Clean the water tank with a little mild detergent on a towel and then rinse in water.
4.
Put the water tank in place after cleaning.
Note: After some time operation, dust and dirt may occur in water tank. It is recommended to
change water and clean water tank frequently.
EN-08
