THOMSON TG797, Руководство по установке и эксплуатации

Страница: 41 / 88

E-DOC-CTC-20080421-0018 v1.0
35
5 Telephony
3 In the Location bar , click Configure .
4 Select Service Enabled .
5 Click Apply .
Verifying Telephone Connectivity
Proceed as follows to verify the voice connection:
1 Make sure the Thomson Gateway is turned on and ready for service.
2 Check whether your phone is properly attached to the Thomson Gateway.
3 Make sure the Internet telephony service is enabled and configured.
4 The Phone/DECT LED must be solid green.
5 Pick up your phone, wait for the dialling tone, and dial the number. If you dial a ‘#’ after the phone
number, the phone number will be called over the regular telephone network.
Multiple Identities
You can assign up to three Internet telephone numbers or URIs to one or both phone ports, or you can assign
a common number to both phone ports.
Using Multiple Identities
Proceed as follows:
1 Browse to the Thomson Gateway web pages.
2 On the Toolbox menu, click Telephony .
3 In the Location bar , click Configure .
4 In the Pick a task list , click Use multiple identities .
5 Click Add .
6 Enter another URI, your user name and password.
7 Choose the phone port for which you want to use this telephone number.
8 Click Apply .
The phone(s) attached to the Thomson Gateway can receive incoming VoIP calls, as long as your
Thomson Gateway is turned on and the
Phone/DECT LED is lit.
For calls over the analogue phone line, your phones are line-powered by the telephone company
and can therefore always be reached, even if the Thomson Gateway is turned off.
The phone numbers are provided by your provider.