VoIP Business Phone Administrator Manual
Copyright ©2005 THOMSON All rights reserved.
.
1.3
Installation
Before installation, please complete the following checklist:
Handset Connection:
Connect the handset to the main base unit using the coiled cord.
Figure 1.2 Connect the handset to the IP phone base unit
Cable Connections:
A number of ports are provided on the rear and left side panels of the IP phone (see
following figures).
Figure 1.3 IP Phone rear and the left side panel connections
(1) Use an Ethernet (CAT-5) cable to connect the LAN port to an Internet equipment.
In PoE (Power over Ethernet) office environment, the IP phone can be powered
from a power switch via an Ethernet cable, in which case the external power
adaptor is not needed.
(2) If the switch is not PoE switch, plug the power adaptor cord into the DC jack
socket at the back of the IP phone, then plug the wall pack into a wall outlet.
- Page 9 -
(3) If you are using the IP phone with a PC, use an Ethernet cable to connect the LAN
Power
PC
WAN/LAN switch Power Adaptor
Headset
Set to L/H position
Outlet
Содержание ST2020
Страница 1: ...Administrator Manual ...