THOMSON SpeedTouch 716, Руководство пользователя

Страница: 39 / 110

Chapter 3
Configuration
E-DOC-CTC-20041126-0014 v3.0
37
3 Configuration
Internet connectivity
Some configuration may be required to prepare the SpeedTouch™ for Internet
connectivity.
What you need from
your ISP
In most cases, you need a user account with an Internet Service Provider (ISP) for
Internet access.
For this account, your ISP will provide you with:
A user name (logon ID).
A password.
Other information may be required depending on the ISP’s specific requirements
and service profile selection.
Prerequisites
Make sure that:
The SpeedTouch™ device is correctly set up and turned on as described in
“1.2 Setting up the SpeedTouch™” on page 13 .
The SpeedTouch™ device is in its default configuration state. See “8.3 Reset
to Defaults” on page 102 for resetting your SpeedTouch™.
The computer’s Operating System supports TCP/IP and its Ethernet interface is
configured for obtaining its IP configuration dynamically.
Your web browser is capable and allows to run Javascripts.
Configuration
procedure
Proceed as follows:
1
Start the web browser on your computer.
2
Browse to the SpeedTouch™ web pages at http://192.168.1.254 .
3
The SpeedTouch™ prompts you to enter user name and password. Type
“admin” in both fields and click
OK .
4
Your browser connects to the SpeedTouch™ web pages.
5
On the top menu, click Quick Start .
6
On the left menu, click Quick Setup .
7
The Quick Setup wizard will guide you through the configuration of your
SpeedTouch™. Follow the instructions and enter the required information
where needed. This information should be provided by your ISP.
8
At the end of the configuration your SpeedTouch™ will reboot in order to
apply the new configuration.
!
In case of problems you can also configure the computer’s Ethernet or
USB interface with a static private IP address, for example 192.168.1.2,
192.168.1.3, but make sure NOT to use 192.168.1.254 as this is the
default IP address of the SpeedTouch™.
For more information, see your web browser’s help.
For more information on the different windows shown during this
configuration, see
“ The Quick Setup page” on page 47 .