THOMSON SpeedTouch 608, Справочное руководство CLI, Страница: 202 / 490

200
IP Commands
E-DOC-CTC-20040216-0002 v1.0
fraglimit A number between 1 and 1024.
Represents the maximum number of IP packet fragments waiting for
completion.
Generally, the fragmentation limit is 64.
By limiting the fragmentation limit, the depletion of the buffer is
avoided. OPTIONAL
defragmode Define which packets are reassembled under which circumstances.
Choose between:
•
normal:
Packets to be forwarded will not be reassembled.
Packets with local destination, i.e. destined for the
SpeedTouch™, are reassembled.
•
always:
Packets are always reassembled.
•
nat:
Same behavior as
normal
, except for packets to be forwarded
through the Network Address Translation (NAT) engine.
Packets on which address translation is performed are
reassembled as the NAT engine requires the entire packet.
OPTIONAL
addrcheck Set the level of IP address checks.
Choose between:
•
off:
No address checking is performed.
For advanced users only; in normal circumstances there
should always be some kind of address checking.
•
own:
Minimum level of checking.
Only the address configuration on the SpeedTouch™ is
checked.
•
static:
Checking of the address configuration of the SpeedTouch™
and also of traffic: addresses of incoming packets; this checking
is related to constants (e.g. an address may not be entirely
composed of one‘s or zero‘s).
•
dynamic:
Besides the address configuration of the SpeedTouch™ itself,
and besides the checking of traffic on a constants level,
additional checking is performed on the IP addresses that are
determined by the configuration, more specifically by the
network.
OPTIONAL
mssclamping Disable (off) or enable (on) mss clamping for low mtu interfaces.
Mss clamping assures that the size of a TCP packet never exceeds
the available mtu of the outgoing interface.
Note
It is recommended not to disable this parameter.
OPTIONAL