SpeedTouch 210i
13
Your particular system may differ from the window shown here. Check if you have an
Ethernet Network Interface card (NIC) installed. If not, refer to the installation
documentation from the NIC card manufacturer and install the card and drivers.
If you have installed the NIC card,
1. Click the
Add
button. The
Select Network Component
Type
dialog box will open. This box has four options:
Client, Adapter, Protocol,
and
Service.
2. Select Protocol
and click the
Add
button. The
Select Network Protocol
dialog
box will open.
3. Select Microsoft in the left scrolling window, then select TCP/IP on the right, and
click
OK
. It will return to the
Network
dialog box.
Configuring the TCP/IP Protocol
1. On the
Network
dialog box Configuration card, select TCP/IP and then click
Properties
. The
TCP/IP Properties
dialog box will open.
Содержание SpeedTouch 210i
Страница 1: ...User s Guide...
Страница 56: ...SpeedTouch 210i 52...
