Manufacturer: Shenzhen Qiuyu Electronic Co., Ltd.
Address: 3F,E Building, Hongzhuyongqi Industrial Park, Lezhujiao village, xixiang town,
Bao'an District, Shenzhen
After-sale service hotline: 0755-86323159
After-sale service mailbox: [email protected]
Website: http://www.u-rain.com/
V1.0
Product
Output power
Speaker frequency
Bluetooth version
Bluetooth range
Bare machine weight
Dimensions
QY-K600
15W*2
45Hz-20KHz
5.0, A2DP, AVRCP
Within 10 meters
About 830g
speaker: 250*105*63mm
8. Main technical parameters
10. Charging instructions
Low volume or distortion
Bluetooth indicator light is not on
Music discontinuity
Pairing failure
Solutions
9. Simple troubleshooting solutions
When the speaker prompts low battery, please charge it in time. It can be connected to
the 5V/2A charging device with the attached charging cable, and it can be fully charged
in about 4 hours. When the LED light of the speaker flashes, it means that it is charging.
After it is fully charged, the LED light will be always on, indicating battery is charged.
1. Check the audio volume and adjust it
to the right size
2. Battery low , need to be charged
1.Battery low. Please charge and try again.
2.Restart
1. There is an obstacle between the mobile
device and the Bluetooth device. Please
remove the obstacle.
2. Beyond the effective connection distance.
1.Check if the phone is in the pairing state.
2.The speaker has been successfully paired with
other equipment. Please disconnect the pairing
with other equipment first.
3.Delete the original device name on your
phone and re-pair.
Trouble
04
05
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer
could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
FCC Warning:
