7
EN
Settings
Showing Demonstration
Press
DEMO
to turn on/off demonstration mode.
The demonstration scrolls through all display
operations.
Setting the Clock
1. Press and hold
CLOCK
until the hour flashes
on the display.
2. Press
PRESET -
or
to set
the hour and then press
CLOCK
to shift to
minute digits.
3. Press
PRESET -
or
to set
the minute.
4. Press
PROG/SET
to save settings and
STOP
to quit setting.
Setting the Timer
1. Press and hold
TIMER
until the ON and clock
hour flashes on the display ( ON - timer on
time ).
2. For setting time, press
PRESET -
or
on the main unit to set the
hour and then press
TIMER
to shift to
minute digits.
3. Press
PRESET -
or
to set
the minute.
4. Press
TIMER
to change to OF (timer off time)
with clock time flashing. Repeat steps 2 & 3 for
timer off time setting.
5. Press
TIMER
to select source. Press
PRESET -
or
to select between CD /
TUNER / TAPE / REC TU.
If REC TU is selected, select the preset station
by pressing
PRESET -
or
on
the main unit or
PRESET FOLDER
or
on the remote control.
6. Press
TIMER
to set volume. Adjust
VOLUME
control to select desired volume level.
7. Press
PROG/SET
to save settings.
Press
STOP
to quit setting.
The timer is automatically activated once timer
setting is saved.
Activating the Timer
Press and release
TIMER
to turn on/off the timer.
The timer icon is displayed when timer is
activated.
Note:
When system is ON, you can press
CLOCK
to display the current time for about 2
seconds.
MS4300 EN 3/9/05 4:33 PM Page 13
