Quick Installation Guide for MPC-STD
THOMSON TECHNOLOGY
●
9087A – 198
th
STREET, LANGLEY, BC CANADA V1M 3B1
TELEPHONE: (604) 888-3381
●
EMAIL: [email protected]
●
www.thomsontechnology.com
PM085 REV 1 08/08/28
NOTE:
•
When comm./setup/configuration is correct the program will increment both counters
(Number of Polls and Valid Slave Responses) at the same rate. You may notice that the
two numbers are at a different value but both will count up at the same time.
•
If there is any issues with comm./setup/configuration, you may see the following messages
o
**Data Un-Initialized**
o
**Device NOT CONNECTED!**
o
**MODBUS Message TIME-OUT**
o
**MODBUS Exception Response from Slave Device**
For MEC20 – Enter
Address: ‘1001’
Length: ‘5’
’03:HOLDING REGISTER’
For TSC800 – Enter
Address: ‘6001’
Length: ‘5’
’03:HOLDING REGISTER’
Enter the required Modbus
Node number (the default node
is 1).
I.E.
Device Id:
1
