EN
EN
Programming Tracks
1. In stop mode, press and hold
MODE
for 2 seconds to enter program mode.
The program mode icon lights on
the display.
The flashing ‘ - -’ is the track selection
and ‘P01’ is the program list position.
(If you have program in your player,
the pre-programmed track number
will be shown.
2. Press
SKIP BACKWARD
( ) or
SKIP
FORWARD
( ) to select a track. The
selected track number flashes on the
display.
3. Press
MODE
to confirm track selection.
4. Press
MODE
again to skip to the next
programming position.
5. Repeat steps 2-4 for further selections.
6. Press
OFF / STOP
( ) to exit
programming mode.
The unit returns to stop mode
automatically after 30 seconds if there
is no key activation.
See “Play Modes” section for more
information on program playback.
Digital Music Operation
15
Note
The player enters Intro Play mode
and plays the beginning of each track
as you scroll through tracks for
programming.
Tip
20 program locations are available
on this unit.
P
- - P 0 1
S o n g I n f o
14
Digital Music Operation
Key Lock
•
To avoid accidental key activation,
slide the key lock switch on the back of
the unit to the lock ( ) position.
The Lock icon can be seen on
display.
•
Slide to the switch to the
OFF
position
to unlock keys.
DSP
Press the
DSP
button repeatedly to select
among DSP modes:
FLAT > BASS > POP > ROCK > JAZZ
Play modes
During playback, press
MODE
repeatedly
to select among the following playback
modes:
> Normal playback
Repeat All -
Shuffle -
Shuffle repeat -
Program -
Repeat program -
Note
Program and Repeat program will
only appear if there are programmed
tracks.
Note
When the unit is in off mode and the
key lock switch is at the lock ( )
position, pressing the
ON / PLAY /
PAUSE
key will cause the display to
show the key lock icon ( ) for
three seconds.
0 1 0 0 : 2 8
D S P F l a t
P
P
PDP2548_56 EN budphones 12/6/04 9:34 AM Page 22
