2
1. Put the batteries in the remote control unit.
PRECAUTIONS ON USING BATTERIES
- Only use the battery types specified.
- Make sure you use the correct polarity.
- Do not mix new and used batteries.
- Do not use rechargeable batteries.
- Do not expose batteries to excessive heat, throw them
on the fire, recharge them or try to open them, as this
could cause them to leak or explode.
- Remove the batteries from the remote control if you are
not using it for a long period of time (several weeks).
2. Connect the TV to a mains socket.
The mains plug carries the power supply to your TV set. It
should only be connected to an AC supply at 220 - 240 V
~ 50 Hz. It must not be connected to a DC supply.
If the plug is detached from the cable, do not under any
circumstances connect it to a mains socket as there is a
danger of electrocution.
UK SOCKET:
Equipment for the UK is supplied with a mains cable
fitted with a moulded plug.
The plug contains safety components and must not be
replaced by a type sold in shops. It is fitted with a fuse
that protects your television. If your set no longer works,
the fuse may have blown. If it has, replace it with an
identical ASTA certified or BSI (BS 1362) 5 amp fuse.
3. Connect the outside aerial or cable network to
the
g
socket at the back of the TV set.
The aerial socket is for connecting an external antenna
or equipment fitted with a modulator (VCR, satellite
receiver, etc.).When connecting additional equipment to
the aerial socket, you must assign a channel number to
it.To do so, switch the external equipment on, then search
for its modulator channel on the TV set, assign the
channel number found to the equipment and store. From
now on, every time you want to use the external
equipment connected, you must select the channel
number assigned to it.VCR’s without an integrated
modulator do not require this setting.
4. Continue on page 4, Channel set-up.
Continental Europe
5A
United Kingdom
Inserting batteries (2 x LR 03-AAA).
2
1
3
Please respect the environment and
prevailing regulations. Before you dispose of
batteries or accumulators, ask your dealer
whether they are subject to special recycling
and if he accepts to take them back.
220 / 240 V~ 50Hz
Set-up
To set up your TV set, follow the instructions on this page before you continue with the channel set-up
procedure described on page 4.
_en 23/01/04 13:21 Page 2
