THOMSON Grass Valley Kalypso Classic, Справочное руководство

Страница: 288 / 404

288 Kalypso Reference Manual
Section 3 — Menus
The
Grab Key
button permits grabbing only the key portion of an image. This
button is active only after a Video and Key grab has been performed.
Grab Key
can be used if the video and key are supplied from separate sources
or are laid down sequentially on a graphics reel. The key image to be
grabbed cannot be previewed using the Still Store (do not press the
Show Input
button, as this discards the currently grabbed material). You can
use a separate monitor to view the graphics reel to cue to the key image.
Note The Grab buttons are intended for quick capture of full screen stills. To
capture a smaller area, set up a single frame fenced record (see
page 290 ).
The
Save
button opens a dialog box used to save the current item to disk
( Figure 197 ). The item will be saved to the currently selected folder (see
Folder Browser on page 283 ).
Figure 197. Save Dialog Box
Three save options are available:
Enter absolute Clip ID
– Entering a number will save the item to the speci-
fied location, overwriting any item that may be present at that location.
Enter ID Zero
– Entering zero (0) makes the system save the time to the
lowest number available storage location.
Press (Enter)
– Pressing Enter saves the item to the same item storage
location, overwriting the item currently saved to that location.
The progress of the save is reported in the upper right notification area.