THOMSON Grass Valley Kalypso Classic, Справочное руководство

Страница: 272 / 404

272 Kalypso Reference Manual
Section 3 — Menus
Copy Swap Menus
The Copy Swap menus are used for copying setups from one part of the
system to another. For example, if a chroma key was set up on M/E 1, but
the operator needs the key while M/E 1 is in use, he can copy the keyer’s
setup to M/E 2 and place the chroma key on air there.
Note Copy Swap operations for Macros are available in the separate Macro menu.
The set of menus for Copy and Swap use a common layout. The
Copy/Swap Matte menu, shown in
Figure 185 , typifies the layout shared
by the others. Choose a source in the From pane, choose a destination in the
To pane, and an action in the Action pane. After performing a Copy or
Swap, one level of Undo is available until another button on the menu is
pressed.
Figure 185. Copy Swap Menu