THOMSON Grass Valley Acappella, Инструкция по эксплуатации, Страница: 82 / 110

82 Acappella — Instruction Manual
Section 4 — Software and Configuration
System Identifier:
Leave this setting to
Default
on an Acappella system running on its own net-
work.
If your Acappella system is running on a network shared by Prelude or
Encore systems, you can isolate them from one another by assigning dif-
ferent ports for each system, using the System Identifier buttons. See
System
Identifier: on page 60 for an explanation of this feature.
Note All components on an individual system must use the same System Identifier
(port) number.
System Broadcast Select:
Leave this setting at
Use Broadcast
if your Acappella system has none or only
a small number of remote panels (three or less).
Selecting
Use Multicast
makes this Acappella device employ a more efficient
networking mechanism, useful for systems with several remote panels.
Note All components on an individual system must use the same Broadcast set-
tings.
Saving Settings
You must select
Do Reset
and click on
Save New Settings
before any changes
made to this page will take effect. Remember that all components of a spe-
cific system must have the same port settings, so if you change this you
must change all the others components to match.