Thomson
Thomson Electrak
®
GX Actuator - Installation Manual - 2022-02
17
6.2 Ordering key for ac voltage models
Ordering Key
Position
1
2
3
4
5
6
7
8
Example
A12C05A5-
06
M0
B
N
-D
E
E
1. Model, input voltage, dynamic load capacity, screw type,
maximum speed
A12C05A5- = Electrak GX, 1 × 115 Vac, 1100 N, acme, 54 mm/s
A12C10A5- = Electrak GX, 1 × 115 Vac, 2250 N, acme, 30 mm/s
A12C20A5- = Electrak GX, 1 × 115 Vac, 2250 N, acme, 15 mm/s
A12C05B5- = Electrak GX, 1 × 115 Vac, 2250 N, ball, 61 mm/s
A12C10B5- = Electrak GX, 1 × 115 Vac, 4500 N, ball, 30 mm/s
A12C20B5- = Electrak GX, 1 × 115 Vac, 4500 N, ball, 15 mm/s
A12C21B5- = Electrak GX, 1 × 115 Vac, 6800 N, ball, 15 mm/s
A12C2KB5- = Electrak GX, 1 × 115 Vac, 9000 N, ball, 10 mm/s
A22C05A5- = Electrak GX, 1 × 230 Vac, 1100 N, acme, 54 mm/s
A22C10A5- = Electrak GX, 1 × 230 Vac, 2250 N, acme, 30 mm/s
A22C20A5- = Electrak GX, 1 × 230 Vac, 2250 N, acme, 15 mm/s
A22C05B5- = Electrak GX, 1 × 230 Vac, 2250 N, ball, 61 mm/s
A22C10B5- = Electrak GX, 1 × 230 Vac, 4500 N, ball, 30 mm/s
A22C20B5- = Electrak GX, 1 × 230 Vac, 4500 N, ball, 15 mm/s
A22C21B5- = Electrak GX, 1 × 230 Vac, 6800 N, ball, 15 mm/s
A22C2KB5- = Electrak GX, 1 × 230 Vac, 9000 N, ball, 10 mm/s
A42C10A5- = Electrak GX, 3 × 400 Vac, 1100 N, acme, 30 mm/s
A42C20A5- = Electrak GX, 3 × 400 Vac, 1100 N, acme, 15 mm/s
A42C05B5- = Electrak GX, 3 × 400 Vac, 1100 N, ball, 61 mm/s
A42C10B5- = Electrak GX, 3 × 400 Vac, 2250 N, ball, 30 mm/s
A42C20B5- = Electrak GX, 3 × 400 Vac, 2250 N, ball, 15 mm/s
2. Ordering stroke length
06 = 6 inch (152.4 mm)
08 = 8 inch (203.2 mm)
10 = 10 inch (254.0 mm)
12 = 12 inch (304.8 mm)
14 = 14 inch (355.6 mm)
16 = 16 inch (406.4 mm)
18 = 18 inch (457.2 mm)
20 = 20 inch (508.0 mm)
22 = 22 inch (558.8 mm)
24 = 24 inch (609.6 mm)
3. Rear adapter hole orientation
M0 = adapter at 0° (standard)
M3 = adapter at 90°
(3)
M0 - M3
5. Ingress protection rating
B = IP45
6. Options
N = no option
P = potentiometer feedback
H = manual override
Dimensions for manual override option
7. Connector option
-D = no connector (flying leads)
8. Front adapter option
E = cross hole for 0.5 inch pin
F = forked cross hole for 0.5 inch pin
G = 1/2-20 UNF 2B female thread
K = cross hole for 10 mm pin
M = cross hole for 12 mm pin
N = forked cross hole for 12 mm pin
P = M12 female thread
9. Rear adapter option
E = cross hole for 0.5 inch pin
K = cross hole for 10 mm pin
M = cross hole for 12 mm pin
(1) 21B5 not possible with strokes above 20 inch
(2) 2KB5 not possible for strokes above 12 inch
(3) Not possible with option manual override
Model
X
Y
AxxxO5A(B)5-
49.6
0.0
Axxx10A(B)5-
43.3
5.2
Axxx20(21, 2K)A(B)5-
38.9
0.0
