Lic
en
se T
ran
sfe
r
4
License Transfer
Transferring license
When you are using EDIUS on a desktop PC where the numbers of USB ports are
limited, or when you do not want to carry USB key, consider transferring EDIUS
licenses. Make sure to read and understand the following notes before transferring
licenses.
The procedure in Windows Vista is described here. The operation is same in Windows
XP.
Notes
The license transfer tool must be executed on a PC where EDIUS has
been installed.
When you close the license transfer tool, make sure that the transferring
procedures of license have been completed. If you close the tool while
processing, your EDIUS license may be lost.
Please note that the USB key cannot be reissued no matter what the
circumstances (even when the license information exists on a PC). Keep
the USB key securely.
License can only be transferred between PC and USB key, or between
USB and USB. It cannot be transferred from a PC to another PC.
If you have several licenses of the same product, they cannot be
integrated in one USB key.
If you have transferred the license to a PC, there is a possibility that
the license may be lost because of the malfunction of a hard disk drive
or any other reasons. We recommend that you should not transfer the
license to a PC unless there is a compelling reason.
Note that when you have transferred the license to a PC, the registered
license data may become invalid if you change the hardware (CPU,
Memory, Motherboard, HDD, NIC, etc) configurations.
•
•
•
•
•
•
•
Using License Transfer tool
1
Set the USB key that contains the licenses you want to
transfer to a USB port of a PC.
2
Set the product DVD into the DVD-ROM drive.
