Getting Started
EN
5
Getting Started
Connecting to Audio-Visual Components
4
TV
SAT
AUDIO OUT
(VCR)
AUDIO OUT
(SA
T)
VCR
S-video
S-video provides a better connection for the video portion of the signal than composite video (yellow color terminal). When
connecting S-video cable, a Composite video cable (yellow RCA connector) must also be used.
VIDEO IN (TV)
S-VIDEO IN (TV)
SCAR
T
IN (TV)
SCART video output
(SCART cable is not supplied with this unit)
SCART video terminal provides the best quality for video signal. If there is no SCART socket is available on your TV
set, check whether your TV has another Video socket (Composite, S-video) that you can use to connect your player.
The unit does not have audio signal from the SCART output.
1
Setup video output
You can select either S-video or SCART as your video output (default is SCART). Try power off the unit and turn it on
again if you see any picture distortion on the TV.
When S-video output is selected, SCART will only provide composite video signal.
When SCART output is selected, S-video ouput will be disabled.
Composite video signal is always available.
It is recommended that you should only use one kind of connection method listed
below.
Connecting the Antennas
The FM antennas connect to the FM terminals on the sys-
tem’s back panel.
They must be hooked up in order to have clear reception.
Tip
:
• For FM reception, extend antenna to its
full length and arrange the antenna at dif-
ferent parts of the room until the recep-
tion is optimized.
DPL913VD-EN receiver 10/26/04 2:22 PM Page 8
