THOMSON DFT-6700, Руководство пользователя

Страница: 12 / 37

DFT-6700 Battery Charger Users Manual
11
Chapter 3 Connection
3.1. Preparations
Confirm that the voltage level of charged battery string is consistent with the charge tester!
Before connecting to the DFT-6700 Tester, first confirm that the charged battery string has exited the operating
state and has been disconnected from the charging power and load. Avoid accidents during charge.
There is enough space around the battery string and the DFT-6700 Tester,
There are No flammable and explosive materials around the site
There are No flammable and explosive gases in the air.
Check that the DFT-6700 Tester is in good condition and that the power switch is in an open state.
There must be no inflammable and explosive materials around the work.
The air must not contain flammable and explosive gases to prevent the occurrence of explosions!
3.2. Host connection
a) The Air (Control) Switch of the tester back should be in a closed position, if not, please close;
b) The host power switch is in the off position;
c) Plug in the host power lead;