DFT-6102 Battery
Conductance
Tester Instruction Manual
7
2.3.1
Custom standard parameters
Click the "Unit" button on the right side of "Battery Voltage", pop up the custom parameter dialog window, set the
custom parameters, click "Save". After saving, you can see that the "V" of the button changes to "Custom x",
indicating that the customization was successful.
2.3.2
Standard parameter selection
Click the button on the right side of the "Battery Voltage" or "Standard Capacity" character to pop up the list of
standard parameters, select a parameter according to the needs, click again to set the parameters, and the main
interface updates the display. After clicking the "Save" button at the bottom of the "String Test" interface, the set
parameters will be saved permanently and the switch will not be lost again, and there is no need to set the
parameters repeatedly, which is convenient for the next test.
2.3.3
Operating instructions
Click the "Operation Instructions" button, and the dialog window that pops up details the operation process and
precautions of the entire single-cell Test.
2.4.
Data management function
Click on the "Data Management" menu item on the main interface to enter the data management function
interface, including single-cell battery Test data and Battery String Test data, which can be opened and played
back on the data records. Dump U-disks. Delete and other operations, while also can format data records. The
interface for data management is shown in the following figure:
