THOMSON BB8298, Руководство пользователя, Страница: 6 / 19

6
THE MAIN SCREEN
After logging in you will see the main screen. Here you can see the current position of the Pet Sitter on the map and have
access to all the functions of the app. These are as follows:
Fig.12
Settings
Current
location
Geo-fence
options
Path history of
the tracking
device
Selecting / Adding device
Account options
LOCATION
Click on this option to show the current location of the tracker. This will also show the date, time and address. If you click
on the ‘Go Here’ option you can get full directions to the location, just like using a sat-nav device.
Fig.13
GEO-FENCE
A “Geo-Fence” is a virtual boundary for a zone which the Pet Sitter is not supposed to leave. For example if you use the
Pet Sitter device on your pet, you could set up a geo-fence around your house or property to get an alert if your pet
leaves the area.
To set up a geo-fence, you first need to define the center of the geo-fence zone. Then you set the radius for the fence to
surround this point. You can define the center in two ways:
- Simply point to the center by selecting it on the map you see in the screen.
- By pressing the pencil icon in lower right of the screen, you can manually enter an address for the map to go to.
- To define the radius of the geo-fence, use the slider at the bottom of the page. You can set the fence from 50M to
500M.
- After defining both center and radius, hit finish to complete the setup. Now you will receive notifications if the Pet Sitter
leaves this defined area.