13
Manual channel set-up
Follow the procedure given on this page if you find that some channels have not been stored during the initial
set-up. This can happen if you are setting up cable network channels. Setting up channels manually requires
every setting for a particular channel to be entered, one at a time.
MANUAL INSTALLATION
Return
Standard
EURO…
Frequency
150.75MHz
Programme name
BBC2
Fine-tuning
------|----------
Store on programme
02
Decoder
o
Teletext char. set
1…
Display the
OVERVIEW
menu by pressing the
MENU
button.
Select the
Installation
option and press
OK
to
confirm.
Select the relevant country and press
OK
.
Select the
Manual Installation
option from the
INSTALLATION
menu and press
OK
to confirm.
1.
Select the
Standard
option and then the relevant standard for your country using the
!
/
ÿ
buttons.
Note: the following standards are available to choose from:
UK
for the UK and Ireland,
FR
for France and
Luxembourg,
DK
for Eastern Europe ,the Middle East and Asia,
EURO
for Western Europe, Australia and New
Zealand.
2.
Select the
Frequency
option. Use the
!
or
ÿ
button to start the search in ascending or descending
order. When a channel is found pictures appear.
Note : If the channel name is found,it is displayed next to
Programme name
option.
3.
If the picture is not clear you can adjust the setting. You do this by selecting the
Fine tuning
option and
adjusting it with the
!
/
ÿ
buttons.
4.
If the channel is encrypted and you want to connect a decoder, select the
Decoder
option and check the
box by pressing the
OK
button.
5.
Then select the
Teletext char. set
option and choose the character set that will be used for Teletext on
this channel using the
!
/
ÿ
buttons. The following character sets are available:
1 :Western Europe
2 : Eastern Europe
3 : Turkish and Greek
4 : Russian and Bulgarian
5 :Arabic
6 : Farsi
The character set selected determines how characters are displayed on Teletext screens.
6.
Select the
Store on programme
option to assign a number to the channel. Enter the number using the
numeric buttons. Press the
OK
button to confirm.
Important: as soon as you change a setting in the
MANUAL INSTALLATION
menu the channel number starts
flashing under the
Store on programme
option .To confirm your change you must select the
Store on
programme
option and press
OK
. If you do not confirm the change it will be cancelled when you change channel or
put the television into standby mode.
Repeat this procedure (2 to 6) to find other channels.
Automatic update:
Auto update
allows you to set up channels just launched or any channels that are missing or wrongly set up.
You can access the menu by selecting the
Automatic update
line in the
INSTALLATION
menu.
Return
: returns to the
INSTALLATION
menu
.
Standard
: Select the relevant standard for your country using the
!
/
ÿ
buttons.
Start
: Press
OK
to start the auto update function.
The Frequency is incrementing for showing the progress of the search, “
New pr. found
” is incremented
each time a PR that was not already installed is found. When the highest frequency is reached, the auto update
will stop. Or if you press
EXIT
button, you will stop the auto update searching also.
